ATR7/8X36 Simpson Strong-Tie 7/8" x 36" All-Thread Rod LGT/MGT/VGT/HGT Girder Tiedowns These Gusset Fittings have 9/16"

These Gusset Fittings have 9/16" punched holes and should be used with like metals

Drive screw until the washer compresses firmly against the surface

The Simpson Strong-Tie DHU Face-Mount Fire Wall Hanger is designed for structurally supporting joist floor loads that bear on wood stud walls with two layers of 5/8" gypsum board

With the slots of the bracket facing up

ATR7/8X36 Simpson Strong-Tie 7/8" x 36" All-Thread Rod LGT/MGT/VGT/HGT Girder Tiedowns These Gusset Fittings have 9/16"When pairing a nut with threaded rod, the material and finish must match. If these do not match, the nut will not fit the threaded rod. The Simpson Strong Tie ATR All Thread Rods are fully threaded tension rods designed for use in Simpson Strong Tie anchoring systems, including the Anchor Tiedown System (ATS) for shearwall overturning restraint and the Wind Uplift Restraint System (URS) for roofs. These rods are suitable for various applications